Interacció amb SiPy1.0r de pycom

Connexió bàsica

Després de prémer el botó de reset:

rst:0x1 (POWERON_RESET),boot:0x3f (SPI_FAST_FLASH_BOOT)
ets Jun  8 2016 00:22:57
rst:0x10 (RTCWDT_RTC_RESET),boot:0x3f (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:QIO, clock div:2
load:0x3fff9010,len:8
load:0x3fff9018,len:248
load:0x40078000,len:4056
load:0x4009fc00,len:920
entry 0x4009fde4
I (1577) wifi: wifi firmware version: 2a22b2d
I (1593) wifi: pp_task_hdl : 3ffd6b74, prio:23, stack:8192
I (1593) wifi: Init lldesc rx mblock:10
I (1593) wifi: Init lldesc rx ampdu len mblock:7
I (1595) wifi: Init lldesc rx ampdu entry mblock:4
I (1600) wifi: sleep disable
I (2588) wifi: frc2_timer_task_hdl:3ffdcbc4, prio:22, stack:2048
I (2612) wifi: mode : softAP (24:0a:c4:00:e3:81)
MicroPython v1.8.6-493-g99ac80fe on 2017-03-03; SiPy with ESP32
Type "help()" for more information.
>>> help()
Welcome to MicroPython!
For online help please visit http://micropython.org/help/.
For further help on a specific object, type help(obj)
>>> from network import Sigfox
>>> import socket
>>> import ubinascii
>>> sigfox = Sigfox(mode=Sigfox.SIGFOX, rcz=Sigfox.RCZ1)
>>> sigfox.mac()
b'p\xb3\xd5I\x99\n\xfcF'
>>> sigfox.id()
b'\x00M*]'
>>> sigfox.pac()
b'\x93n\xf7\x10\x01\xc8&\x9d'
>>> ubinascii.hexlify(sigfox.mac())
b'70b3d549990afc46'
>>> ubinascii.hexlify(sigfox.id())
b'004d2a5d'
>>> ubinascii.hexlify(sigfox.pac())
b'936ef71001c8269d'
>>>

Instruccions de micropython específiques per a SiPy de pycom